Fabric Testing Equipment

Product Details:

The "ASIAN" Air Permeability Tester for textiles is used for air permeability testing of the fabrics. Digital and analog models are available. This system consists of an arrangement for holding the test specimens between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed area of the test specimens. There is an arrangement to measure the volume of air flowing through the test specimen, and arrangement to measure the pressure drop between the faces of the test specimen. The test specimen is held between two round-shaped grips. The grips are lined with the rubber gasket to avoid the leakage of air through the edges. The two grips can be held the test specimens with the help of a hand operated screw mechanism. The vacuum needed to draw the air through the test specimens is created with the vacuum pump supplied with the instrument. The vacuum pressure is measured by the digital manometer (or manometer tube) in terms of mm of water level & airflow is measured by the Rotameters attached with the instrument. The equipment is metallic paint & bright chrome plating finish for corrosion resistant finishing.


Technical Specification:

• Test area: 10, 20, 50, and 100 cm²
• Rotameters: 9 to 90; 65 to 650; 360 to 3,600; and 1,940 to 19,400 lph
• Standards: IS 11056 - 1984, DIN 53887

More Range of Fabric Testing Equipment

Additional Information:

• Item Code: FabAirPerAna
• Production Capacity: 500
• Delivery Time: 15 days
• Packaging Details: Basic instrument Two Sets of testing heads operating manual calibration certificate

Product Details:

The “ASIAN” Air Permeability Tester for textiles is used for air permeability testing of the fabrics. Digital  model are available.

Additional Information:

• Delivery Time: 20 days

Product Details:

Full range of PPE test equipments are available
We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments .

Additional Information:

• Item Code: ATEPPECovid19
• Production Capacity: 30
• Delivery Time: 10 Days
• Packaging Details: basic instrument

Product Details:

In order to determine the colorfastness of dyed or printed textiles or leather, this test is used for the determination ofcolor fastness against rubbing, either under dry or under wet conditions.

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 




We are the manufacturer of the different type of Test Cabinets

Product Details:

The “ASIAN” Bundesmann Apparatus is used for the water absorption and water penetration of the textile fabrics. It consists of a steel structure with specimens is rotated at a specified speed in this tank about a vertical axis with the help on an Electric motor and worm reduction gearbox placed underneath the tank. Impinging of water jets coming from nozzles on 304 Screws fitted on an aluminum plate produces the shower. The nozzles are fitted on aluminum blocks, which are in turn connected to a closed piping system. Water is supplied to the piping system through an electric pump. A control valve and a pressure gauge are also provided to regulate and indicate pressure in the pipeline. A guard is provided to contain splash produced. Water not impinging on the screws is also collected in this tray and drained away. This shower arrangement is mounted on the top of the structure to give the specified drop height. A hinged tray which can be swung during the testing is also provided to shield the assembly from the shower before and after the test. An arrangement to collect water circulation tank and re-circulate it with the help of the pump is also provided. The cup assembly consists of four aluminum cups with their axis tilted outward at 10º to 15º to the vertical mounted on an aluminum base. Specimen holding ring made of aluminum hold the specimen onto the cups with the help have screwed clamps. Each cup four-wiper blades set perpendicular to each other in the form of a cross. The wiper blades are made of stainless steel and are tapered down away from the center. The abrading face of each blade is cylindrical in shape. The wiper assembly presses against the lower surface of the test specimen with the help of a spring. The arrangement is also made to make the wiper blade assembly oscillate through an angle of 100º four times in every one revolution of the cup assembly. Gunmetal drain fitted to each cup for draining out the water collected in them. The cup assembly can be easily taken out to facilitate mounting of specimens and draining of water collected in the cups for determination of the amount of water that has penetrated through the specimens. Specimens loading disk is also provided with the equipment to depress wipers to rim level while mounting the specimen.

Additional Information:

• Item Code: ATEBundasman
• Production Capacity: 5 unita per month
• Delivery Time: 30 days
• Packaging Details: Basic instrument sample holder assembly Measuring cylinder Template Mallet operating manual Calibration certificale

Product Details:

Used for cutting the te
Gram per square meter of the fabrics is an important measurement of the fabrics. For accurate measurement the size (i.e. area) of the test specimen should be accurate. The accurate area cut by round cutter.

st sample for GSM measurement

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


Used for Fabric testing

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


as per AATCC

Additional Information:

• Delivery Time: 20 Days

Product Details:

The Synthetic blood Penetration Resistance Tester is used to evaluate the barrier performance of fabrics used as surgical gowns. The specimen to be tested is subjected to chocking in synthetic blood solution and penetration through the fabrics is checked. All types of fabrics that can be used in high risk surgeries can be test by this instrument.As PER IS:16546,ASTM F1670, ASTM F1671,ISO 16603, IS:17334, IS:16546
Automatic instrument control automatically pressure with respect to time.
we have two models one is destructive model (in which cut samples are used for testing)
another is nondestructive model (in which whole sample can be test)

Additional Information:

• Production Capacity: 50 Pieces per month
• Delivery Time: 15 Days
• Packaging Details: Basic instrument spanner filling accessories Calibration certificate operating manual

Product Details:

The “ASIAN” Elmendorf Tear Tester consists of a brass sector pendulum pivoted on anti-friction ball bearings over a vertical bracket fixed on a rigid metallic base. The test specimen, in shape of a rectangular, is held between two clamps, one of which is mounted on a pendulum and the other is mounted on the vertical bracket. The clamps are mounted in such a manner that their holding faces are aligned with each other when the pendulum is released by lifting a release lever the action cause the pendulum to fall down under its weight & to tear the test specimen while doing so. Th energy absorbed during tearing is indicated on a scale fitted on pendulum by a low friction pointer pivoted on the axis of the pendulum. An adjustable knife is also mounted on the pendulum upper bracket is centered between the two clamps & is used for making the initial slit in the test specimen. A check weight is supplied with the tester for verification of the scale. The instruments are finished is metallic painting and bright chrome plating to give it a corrosion resistant finish.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Production Capacity: 50 unit per month
• Delivery Time: 20 days

Product Details:

Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permits to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. The left-hand side of the chamber has a hole, an exhaust fan fitted to the left-hand side hole. The right-hand side has a hole which permits to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which has a clear glass window on the door. There are shutters on the left-hand side and the right-hand side hole of the chamber. The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is an aluminum silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20?a to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mounted on the bottom of the chamber at an angle of 45. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply any gas with the instrument.

Product Details:

as per IS 15909
This instrument used to concentered load over a period of time is applied, through a puncture tool on the surface of the PVC geomembrane while lying specified hard surface and resistance to static load punctured is observed.

Additional Information:

• Delivery Time: 30 days

Product Details:

We are the leading manufacture &supplier of different type of qualityTesting & Measuring instruments As per BS EN 14683:204IS:16289 

Additional Information:

• Production Capacity: 50 units per month
• Delivery Time: 15 days
• Packaging Details: Basic instrument Test head Calibration certificate operating manual

Product Details:

Any product and material show different properties at different environment. So for checking the properties of any material and product a Standard Temperature & humidity required for that particular product. The ASIAN Conditioning Chamber made of cubical shape, the inner body of the chamber made of stainless steel, there is a stainless steel water tank at the bottom of the chamber, an immersed heater is fitted to the tank for making humidity. There is two wire mesh tray are also fitted to the chamber, the tray is removable, the test specimen are held by the trays. There is a hinged door on the front of it. The outer body is made of mild steel duly powder coated to give it a corrosion resistant long life. There is a control panel on which digital humidity controller, a digital temperature, and switches for cooling, heating, humidity and mains are mounted. The cooling is done by compressor and heating is done by heaters. The temperature sensor and humidity sensor are fitted within the chamber.

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


Used for testing the protective clothas per AATCC 42

Product Details:

Used for synthetic hook loop performance testing

Additional Information:

• Delivery Time: 20 days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 

Product Details:

Test the filling of the textile fabrics supplied with the template, 8 rubber tubes, and jig/fixture. Two box and four box models are available. The “ASIAN” Pilling Tester consists of two cubical boxes inner walls of the box are lined with 3mm thick cork sheet. The boxes are rotated by means of the motor about the horizontal axis. A pre-set digital counter is provided for stopping the tester after a pre-determined number of revolutions. A template, metal cylinder, comprising Jig and 8-rubber tube are provided with the instrument. The instrument is finished by bright chromes plating & metallic painting for corrosion resistant finish.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Production Capacity: 30 unit per month
• Delivery Time: 20 days

Product Details:

“Asian Deep Freezer” is designed to determine the behavior against the cooling of sample. A digital controller is used in this instrument for Set Temperature in negative temperature. Instrument have a space for put the testing sample Inner body of this instrument made by S.S Sheet metal for give a corrosion resistant finish surface .Outer body of this instrument Made by Powder coating paint for give a corrosion resistant finish surface an give a affricative look for Instrument .Instrument operating by single phase AC power Supply.

Un Packaging:  Please unpacked the instrument and checked for transport damage. If there is then inform the company.      

Additional Information:

• Item Code: ATEGloveTest
• Production Capacity: 30 units per month
• Delivery Time: 20 days
• Packaging Details: as per details

Product Details:

The ASIAN Drape Meter consists of a circular specimen support, an electric lamp to give off light, and an exposing and developing arrangement using light sensitive ammonia paper to determined the area covered by the shadow of the test specimen, and an electric lamp to expose the ammonia paper to determine the area covered by the shadow of the test specimen. The circular specimen support is made out cast aluminum and is fixed over a clear acrylic sheet. The sheet is hinged at one end and can be lifted for placing the ammonia paper for exposure. The paper is kept below the acrylic sheet on a resilient surface so that it is in close contact with the sheet when it is horizontal. The specimen holding and paper exposing arrangement are kept inside a sheet metal exposing chamber. The electric lamp is fitted at the upper end of the chamber so that light rays coming from it are intercepted by the test specimen. The rays which are not intercepted fall on the paper and expose it, thus giving a demarcation between exposed and unexposed areas. The chamber has a close fittings door. It has ventilation holes near its bottom and top for keeping it cool. An ammonia vapor developing chamber in which the exposed paper is kept for developing is provided below the exposing chamber. This chamber has a close fitting door and an arrangement to keep ammonium hydroxide to create a suitable atmosphere for developing the print. The test specimen is kept over a welded wire mesh platform to ensure a uniform developing. The outside of the apparatus is finished in dark admiralty gray synthetic enamel to give it a corrosion resistant finish. A metal template of 250 mm diameter have a central hole for marking and cutting the test specimens, a specimen pressing a disc, one hundred sheets of ammonia process paper, and one bottle of ammonium hydroxide are supplied as standard accessories.

Product Details:

We are manufacturer and Supplier of different types of  quality Products. Used for colour fastness test against UV light

Additional Information:

• Item Code: ATEUVChamber
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Production Capacity: 10 pieces per month
• Delivery Time: 30 days
• Packaging Details: Basic Instruments, Sample Holder, Clamping rings, calibration certificate, operating manual

Product Details:

As per IS 11056, IS : 4726, ASTM D737, BS 5636,  DIN 53887, GB/T 5453, ISO 9237, 
Asian High pressure air porosity tester/Electronic Air Porosity Tester (Air Permeability tester)  is used to determine permeability of textile fabric to air, It measures velocity of air flow passing perpendicular through a test specimen
under specified conditions of test area. Pressure drop and time. Touch screen control and LCD display of the test result in the selected test pressure range and test unit without manual calculation.  Testing report will display in Excel Sheet and you can save test report manually. the air permeability features an automatic range system that detects the size of the installed head and predetermines the appropriate pressure range required for accurate testing of a sample.

Additional Information:

• Delivery Time: 30 days