Tensile Strength Tester and elongation are the two prime characteristics of most of the raw materials, whether they are metals or non-metals such as foam, rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.
Range: 250 Kg with 0.1 kg least count digital display
Elongations: Up to 900 mm X 0.1 mm least count digital display
Traverse Speed: 300 & 500 mm/min
Motor: 1/2 Hp, 1425 rpm, 220 V AC single phase induction motor
Power required: 220 V AC, 500 W, single phase
Capacity (Kilogram) : 500 kg
Least Count (Gram) : 100
Test speed (Mm/Minute) : 300mm/min and 500 mm/min
Resolution (Millimetre) : 0.1 mm
Display Type : Digital
Cantilever & Tensile Tester
Mechanical failing load tester for insulator(Cantilever & Tension)
Name : Mechanical failing load tester for insulator (Cantilever & Tension) Other Name : Cantilever/Tension failing load tester for ceramic/polymeric/glass insulator
This Mechanical failing load tester is designed to do type test and sample test on high voltage electrical insulators, testing their mechanical performance of cantilever failing load and tensile failing load. More than one type of machine produced by Contune International Corp have function of tensile test, and surely there are a lot of other types of testing machine which have function of cantilever (bending) test. This machine combines the two function into one machine.
In vertical direction, this testing machine can do tensile test for ceramic disc insulators, polymeric suspension insulators, polymeric tension insulators and glass disc insulators. In horizontal direction, a stable moving device is applied for cantilever test of ceramic post insulators, pin insulator (porcelain), polymeric pin insulators and polymeric post insulators.
The tester is controlled by computer software. The testing strength ,time and testing procedure can be controlled, which make it available to conform testing procedure and acceptance criteria in IEC standard(60383.1). This software has clear view of entire test process, curve and number indicating all necessary test data live, result of which can be saved and printed, very convenient to operate.
Standard Applied :
IEC 60383.1-1993 mod, GB/T 1001.1-2003, GB/T 19443-2004
"Insulators for overhead lines with a nominal voltage above 1000V"
Capacity : 50,100,200,300,500,1000,2000,2500,5000 N
Traverse Speed : 20,10-200,50-500,0. 5-500 mm/min
Display : LED
Plastic Tensile Testing Machine
Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as foam, rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etc.