Tester

Product Details:

Asian Melt Flow Index Tester for plastic measures the melt flow index of the plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruded tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater clogged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of the tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipment.

Product Details:

Toe Cap Impact Tester is made on a horizontal platform which has two guide bars which guide the impact weight. There is a mild steel plunger of specified dimensions which is used the intermediate parts between the impact weight and the toe cap. The plunger is freely supported by the toe cap. The base of the machine is placed on the hard wood of specified dimensions. A capsule for measuring the clearance at the time of maximum depression is also supplied with the instrument. All the parts are either painted or chrome platted to give the instrument a corrosion free long life

Product Details:

The Digital Bursting Strength Tester is designed to find bursting strength of fabric/leather/paper/paperboard. Different models are available in the range. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the clamping surface. The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure. The equipment is ruggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance. For conducting tests on material where one pressure gauge does not cover the full range of loads encountered with the desired accuracy in measurement, a special model fitter with two pressure gauges with an isolating valve can be offered. Digital type pressure gauge type instruments are also available. Digital type pressure gauge with pneumatic clamping model also available.

Additional Information:

• Item Code: AsianDigiBurst
• Production Capacity: 50 Units per month
• Delivery Time: Ready Stock
• Packaging Details: 1. Rubber Diaphragm (lot of 3) 2. Aluminum Foil (For Calibration Checking) (lot of 1) 3. Opener (Handle) 4. Glycerin 200 ml Spare 5. With Calibration Certificate 6. With Operating Manual (in English)

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


We are offering Friction Testers to our clients.

Product Details:

As per IS:9872 and ISO 6941
We are the leading manufacture &
supplier of different type of quality
Testing & Measuring instruments 

Additional Information:

• Production Capacity: 10 units per month
• Delivery Time: 20 Days
• Packaging Details: Basic instrument Standard sample holder burner Calibration certificate Operating manual

Product Details:

 

              The “ASIAN” Inclined Plane Type Flammability Tester made of a stainless steel ventilated draught proof box. There is a specimen rack fitted inside the ventilated draught proof box which is adjusted latterly so that the surface of the tested fabric will be at a standard distance from the micro burner. For ventilation there are twelve holes of standard size. There are five sets of specimen holders of U-shape. The specimen holders are made of stainless steel. The specimen holders hold the specimens in such a way that the fabric specimen is free at the bottom and are held at the top and sides. The ignition mechanism shall comprise a micro- burner mounted on a revolving (with the help of motor) spindle so that, at the commencement of each test, it moves to a position to the surface of the fabrics. There is a digital timer which control the time of flame strike on the test specimen and record the time taken of flame to reach one point to another point of the test specimen (i.e. 127 mm flame spread).

Used for Fabric testing

Additional Information:

• Delivery Time: 20 Days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 



we manufacture 90 degree and 180 degree peel strength tester

Additional Information:

• Item Code: ATE0Peel
• Production Capacity: 100 units per month
• Delivery Time: 3 days
• Packaging Details: Instrument grips/attachments operating manual Calibration certificate

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


used for Paint Testing

Additional Information:

• Delivery Time: 20 Days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 



As per IS:9873, ISO 8124, EN 71

Additional Information:

• Item Code: ATEB
• Production Capacity: 10000 per month
• Delivery Time: 2 Days
• Packaging Details: Basic Template

Product Details:

Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.

Additional Information:

• Production Capacity: 50
• Delivery Time: Ready Stock
• Packaging Details: 1. Rubber Diaphragm (lot of 3) 2. Aluminum Foil (For Calibration Checking) (lot of 1) 3. Opener (Handle) 4. Glycerin 200 ml Spare 5. With Calibration Certificate 6. With Operating Manual (in English)

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 



As Per IS 3400

Additional Information:

• Delivery Time: 15 Days

Product Details:

Used for Paper,Packaging and fabrics testing

Product Details:

We manufacture the Zip Abrasion Tester under load conditions.

Product Details:

Flexometer is used for the assessment of the flexing endurance of light leathers and their surface finishes. The ability of light leathers such as those used in shoe uppers, gloves and garments to withstand repeated flexing without cracking can be accurately determined with ASIAN Flexometer. This testing equipment is built on a rigid metallic base plate. The test specimen is held between a pair of stationary and oscillating grips. The grips are specially designed to enable quick fixing and removal of the test specimen and are shaped to meet the specifications.
A six digit even electronic counter with key reset and backup memory is provided to count the total number of flexing cycles undergone by the test specimens. The equipment is able to carry out a number of flex cycles per test.

Features:

• All the pivot points of the apparatus have ball bearing to ensure the long life and smooth operation
• The apparatus is finished in bright chrome/ zinc plating and NC based painting for a corrosion resistance finish
• Electronic counter with key reset and backup memory to count the total number of flexing cycles
• Standard IS: 5914 – 1970: Method of physical testing of leather (flexing endurance)

Additional Information:

• Item Code: ATEFlexometer
• Production Capacity: 30 units per month
• Delivery Time: 15days
• Packaging Details: Basic instrument Alen Key Tamplate Operating manual Calibration Certificate

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 

Product Details:

ASIAN Din Abrasion Tester is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with the above principle. It consists of test specimen holder to clamp the test specimen with an arrangement to adjust the length of test specimen protruding out. The holder is mounted by a screw mechanism along a length of a rotating drum on which the abrasive cloth is fixed. The movement of the screw mechanism and drum is given by an electric motor, gearbox and chain mechanism to give the specified speed of rotation to the drum and the specified lateral movement to the test specimen holder. The swivel arm and test specimen holder are so disposed that the test specimen is pressed against the drum under the specified load with its center axis at an inclination of 3 degrees to the perpendicular in the direction of rotation and placed above the longitudinal axis of the drum. A rack and pinion arrangement to rotate the test specimen about its axis during the test (whenever desired) is also provided. The abrasive cloth is firmly fixed to the drum using a suitable peelable adhesive with the ends of the abrasive cloth butt jointed together. The equipment is provided with limit switches which, in addition to giving over travel safety to the movement of test holder by preventing the lower edge of the test specimen holder to touch the abrasive cloth. The equipment is built on the rigid steel base and finished in gray metallic and bright chrome/zinc plating to give it a corrosion resistant finish. The molding dies, rotary type cutting dies (hollow drill) for preparing test specimens and extra abrasive cloth are available as optional accessories.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 20 days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


As per IS:9873,ISO:8124 an EN 71-1

Additional Information:

• Production Capacity: 20 per month
• Delivery Time: 10 days
• Packaging Details: Basic instrument standard tape Operating manuak Calibration certificate

Product Details:

ASIAN Cobb Tester is used for the Cobb resistance of the paper. It consists of a brass (or gun metal) cylinder of known inside diameter and length. It has a metallic plate, which is used for clamping the one side of the cylinder with the help of bracket and bolts. The metallic plate, which is used for clamping purpose, pastes a rubber sheet for the perfect clamping. The whole assembly of the cylinder and clamping arrangement is pivoted so that easy and fast pour off the water takes place. A brass roller of specified size and shape is also provided with the instrument. The equipment is designed to give a long and trouble-free life; the components are bright polished and bright chrome plated.

Specifications:

• Inside area of cross section of the cylinder: 100 sq cm.
• Weight of the roller: 10 ± 0.1 kg

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

This Dry Arc Resistance Tester is designed precisely as per various set industrial parameters to work accordingly and accurately in tough environmental conditions. It is thus designed to conduct a test for high voltage/low current on solid electrical insulation material as per ASTM D 495-99 (2004). This dry arc resistance tester is compact in size and can easily be mounted on the table. It is ideal for all types of insulators, polymers and electro plastics for testing their electrical properties. It is integrated with microcontroller module to conduct the test sequence exactly as per the ASTM table.

Features:

• Voltage and current calibration facility
• Test voltage can be adjusted
• Zero interlock facility
• Door open indication
• Control for user safety

Product Details:

used for Coated fabric testing
we are the leading manufacture's Supplier of Different type of quality testing & Measuring Instruments 

Additional Information:

• Delivery Time: 20 days

Product Details:

‘Asian’ Make MIT Folding Endurance Tester is used for Paper, plastic; fabric etc. testing in this equipment is how many cycles specimen is break. In this equipment has a mechanical mechanism for motor to clamping jaw. Equipment cyclic on three angles 90⁰,115⁰and 135⁰ from vertical axis. Using the hang type weight 0.20 to 2kg adjustable. Equipment has a preset Digital counter. This counter used for set the cycle before starting the test. This instrument is made from a rigid fabricated base plate and it is painted and powder coating/ bright chrome plating for corrosion resistant finish and long lif




used for Paper testing

Additional Information:

• Delivery Time: 20 days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 
As per IS 15298

Additional Information:

• Delivery Time: 20 Days

Product Details:

The Asian Martandle Abrasion Tester for zipping made on a created even base plate. There is a course of action for holding the test of zipping evenly on a level plane. The holding game plans have metallic strips which clasp the test example with the assistance of four knurling nuts. There is an emery material of indicated assignment might be mounted on the level stage underneath the test example.

Product Details:

The Asian Compressibility Tester of gasket material' consist of an anvil- a hardened and ground surface on which the sample is placed. There are a set of steel cylindrical shape an anvil- a hardened and ground surface on which the sample is placed. There are a set of steel cylindrical shape penetrators of specified sizes and shape according to the material test (as per Table 1). There are two dials also mounted on the anvil for the measurement of the thickness of the test specimen at the time of pre-loading and the total load. There are two digital dials so that by taking the average value you can measure the accurate thickness. There is the window based software in the load monitor for the application of preload and major load for the specified period after that buzzer give the indication to note the dial gauge reading. Preload – a preload which shall include the weight of the penetrator itself and added the weight of the penetrator itself and added weights to give the value specified within ± 1%. Preloads for various types of gasket materials are as shown in Table 1 unless otherwise specified.

Product Details:

Carton Compression Tester made of a set of plates one is attached to the load measuring arrangement and the other is movable plate which is moved with the help of motor, gearbox, and screw and nut arrangement, the movable plate have the facility of over travel and under travel

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 



Used for PU Foam testing

Additional Information:

• Delivery Time: 20

Product Details:

We are offering Corrugated Carton Compression Tester. The load measuring arrangement is the digital type. The box of which the compression strength is to be determined is placed on the lower plate, due to the motion of the movable plate the box is compressed and the compression load is directly readout on the digital indicator on the panel.

Additional Information:

• Item Code: ateBoxC
• Production Capacity: 50 units per month
• Delivery Time: 20 days

Product Details:

Asian make Rockwell Hardness Tester Model MRS, MRS-150, MRB, MRB-250, and MSM are manually operated. These models are designed and developed after years of experience in this field. All the models are manufactured under strict quality control at all manufacturing stages. These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate. Various Models from the wide range are available for Institutes, Quality Control Laboratories, Tool-Rooms, Heat Treatment Dept, R & D Laboratories, etc.

Other Details:

• These models strictly conform to IS: 1586-2000
• BS: 891 Part 1 & 2 for Rockwell & Rockwell Superficial Test
• IS: 2281 - 2005, ASTM - E-10 for Brinell Test

Additional Information:

• Item Code: HRCBA
• Production Capacity: 5 per month
• Delivery Time: 20 days
• Packaging Details: basic instrument test blocks Standard Indenters spanners operating manual test report

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


As per IS15844

Product Details:

used for safety footwear

Additional Information:

• Delivery Time: 20 days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 




as per IS:16288,IS:16289,ASTM F2100, BS EN 14683

Additional Information:

• Item Code: BFE
• Production Capacity: 5 units per month
• Delivery Time: 20 Days
• Packaging Details: Basic instrument with standard accessories

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 



as per is:9873, ISO 8124, EN 71-1

Additional Information:

• Item Code: ATEaccB
• Production Capacity: 200 per month
• Delivery Time: 7 Days
• Packaging Details: Basic instrument

Product Details:

The Asian Stiffness Tester made of a flat, smooth and low friction horizontal metallic surface. These are two vertical transparent plates on which the line are marked at a specified angle. There is a metallic seat, the bottom surface is attached to a rubber and the upper surface attached to a seat.