Testing Equipment

Product Details:

The “ASIAN” Universal testing machine provide a relatively inexpensive way for determining the Tensile, compression, shear strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, (or place on the compression plate) while the other end is made to move at a known fixed speed with the help of motor, two gear boxes and duel screws arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold, stop the machine when the sample is break and auto calibration. The load directly indicated in kilograms or Newton








Duel capacity, 5 t and 500kgf

Additional Information:

• Production Capacity: 20 units per month
• Delivery Time: 20 Days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


as per ID:9873 and ISO:8124

Product Details:

Asian Melt Flow Indexer Testing Apparatus (Melt Flow Index Tester) for plastic measures the melt flow index of the plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruder tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater clogged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of the tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipment.

Product Details:

                 Durability test for swings is important safety test for swings. There shall be no loosening or structural failure of the suspension connectors when tested by Asian swings durability tester.

 

            Suspension connectors and means of suspension are cycled 180 000 times under load to simulate use.

 

             The Asian Durability tester for swings is made on rigid metallic platform. There is an arrangement for holding the specimen on the horizontal shaft. The shaft is oscillating clockwise and anticlockwise direction at a particular angle. The shaft is oscillating by a gear box and motor. The angle is set with help of the proxy sensor.  There are six proxy sensors mounted on the back of the instrument, which is according to the standard swings angle. The selector switch is used for setting the swing angle.  There is a set of weight also supplied with the instrument. There is a six digit preset counter is also mounted, which count and control the total swings

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 
as per IS:9873 and ISO 8124

Product Details:

The "Asian" Finish Film Adhesion Tester made test specimen plates on which the test specimen is paste. There is a set of Pressing Jig on which the test specimen plates are the amount. A set of loading weight supply with the instrument. Made on the casted base plate. On which the supporting platform with loading knob is mounted. When press the loading knob the supporting platform will lift. The test specimen-pasting strip with test specimen mounted on the slot of the instrument & tight with the help of the tightening bolts. Slotted weights with hanger are also supplied with the instrument for applying the force to the test specimen is testing.

Specifications:

• No. Of test specimen-pasting strip mounted on the Pressing: 5 jigs at a time

Product Details:

The “ASIAN” Round Cutter is used for the accurate cutting of fabrics, paper, flooring etc. The system is made of the aluminum body for light weight. It has for imported blades. It has a lock which is used when the cutter is not used. The rubber pad is an optional accessory. The instrument is finished in bright chrome plating and dark gray metallic paint.

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 

As per IS 5914

Additional Information:

• Delivery Time: 15 days

Product Details:

The “ASIAN” Colour Matching Cabinet provides standardized and environment for visual assessment of color. It is suitable for all applications where is a need to maintain color consistency and quality. It allows a person to evaluate color sample under different light sources, artificial daylight, filament light, ultra violet light and tube light TL 84 (tri-phosphor fluorescent light). The use of multiple light sources is the only way to detect metamerism when samples appear to match less than one light source is the only way to distinctly different under another. Color matching is the universally preferred choice for faster, closer and accurate color matching of samples.

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments IS:9873,ISO8124,EN71

Additional Information:

• Item Code: ATEToysA
• Production Capacity: 500 per month
• Delivery Time: 7 Days
• Packaging Details: Basic instrument

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


Handy and motorised models available

Additional Information:

• Delivery Time: 20 Days

Product Details:

Used For Railway coach Material

Additional Information:

• Production Capacity: 30
• Delivery Time: 20 Days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


We are manufacturer and supplier of different types of Customized Toys Test Equipments.

Product Details:

used for camle testing

Additional Information:

• Production Capacity: 30
• Delivery Time: 20 days

Product Details:

The ability of a fabric to retain pressed in Crease Flex Tester and to recover from creasing is an important property, especially in a case of apparel fabrics. This properly is measured in terms of crease recovery angle, which is defined as the angle formed between the two limbs of a strip of fabric previously folded to form a single crease under prescribed conditions at a specified time after removed of creasing load.

Specifications:

• Size of the Test Specimen: 40 X 15 mm
• Distance between edge of the
• Crease Recovery Angle: 10 ºC – 180 ºC X 0.5

Product Details:

The ASIAN Apparatus for Heat Deflection Temperature Tester consists of a specimen support, an immersion bath, a set of weights under deflection measuring device.The specimen support consists of a two parallel metal supports having rounded edges fixed at a specified distance on an aluminum frame. The load is applied on the test specimen midway between two supports. This block is fitted to the lower end of the vertical rod, which is guided inside a metallic sleeve and is constrained to move without rotating along a vertical axis. The upper end of the vertical rod carries a load carrying plate on which loading weight can be placed to load the test specimen. All the parts are made of aluminum having the same coefficient of linear expansion.The immersion bath consists of a double-walled reservoir having the inner walls made from Stainless Steel sheet and outer walls made of mild steel sheet. The space in between the walls is filled with glass wool insulation. The liquid in the bath is heated by means of an immersion heater and the rate of rising of temperature controlled with the help of an electronic voltage regulator. A digital temperature controller is provided to restrict the maximum temperature of the bath.The deflection of the specimen is measured with the help of dial gauge.

 

 

Additional Information:

• Item Code: HDT
• Production Capacity: 30
• Delivery Time: 20Days
• Packaging Details: Basic instruments set of weights testing head operating manual calibration certificate

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 



As Per IS 15298

Additional Information:

• Delivery Time: 20 Days

Product Details:

The ASIAN Drape Meter consists of a circular specimen support, an electric lamp to give off light, and an exposing and developing arrangement using light sensitive ammonia paper to determined the area covered by the shadow of the test specimen, and an electric lamp to expose the ammonia paper to determine the area covered by the shadow of the test specimen. The circular specimen support is made out cast aluminum and is fixed over a clear acrylic sheet. The sheet is hinged at one end and can be lifted for placing the ammonia paper for exposure. The paper is kept below the acrylic sheet on a resilient surface so that it is in close contact with the sheet when it is horizontal. The specimen holding and paper exposing arrangement are kept inside a sheet metal exposing chamber. The electric lamp is fitted at the upper end of the chamber so that light rays coming from it are intercepted by the test specimen. The rays which are not intercepted fall on the paper and expose it, thus giving a demarcation between exposed and unexposed areas. The chamber has a close fittings door. It has ventilation holes near its bottom and top for keeping it cool. An ammonia vapor developing chamber in which the exposed paper is kept for developing is provided below the exposing chamber. This chamber has a close fitting door and an arrangement to keep ammonium hydroxide to create a suitable atmosphere for developing the print. The test specimen is kept over a welded wire mesh platform to ensure a uniform developing. The outside of the apparatus is finished in dark admiralty gray synthetic enamel to give it a corrosion resistant finish. A metal template of 250 mm diameter have a central hole for marking and cutting the test specimens, a specimen pressing a disc, one hundred sheets of ammonia process paper, and one bottle of ammonium hydroxide are supplied as standard accessories.

Technical Specification:

• Size of specimen support: 125 mm diameter X 60 mm height
• Size of test specimen: 250 mm diameter
• Size of exposing chamber: 400 mm X 400 mm X 800 mm
• Size of developing chamber: 400 mm X 400 mm X 200 mm
• Standard: IS 8357-1977

Additional Information:

• Item Code: FabricsDrape
• Production Capacity: 30 Piece per month
• Delivery Time: 10Days
• Packaging Details: Basic instrument Sample Holder Tamplate Set Of Ammonia Paper Ammonia Solution Ammonia Bottle operating Manual Calibration Certificate

Product Details:

Specifications:

• Range: 2000 lbs with 1 lbs least count digital display
• Elongations: Up to 900mm X 0.1 mm least count digital display
• Speed: 50 mm/min and 100 mm/min (on request other speeds are also available )
• Motor: ½ Hp, 1425 rpm, single phase induction motor

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 



IS:9872, ISO 8124,EN 71

Additional Information:

• Production Capacity: 200 per month
• Delivery Time: 7 days
• Packaging Details: ACC probe A

Product Details:

An oscillating Disc Rheometer (ODR) is testing equipment which analyses the curecharacteristics of the Rubber compound & monitors the processing characteristics aswellasphysicalpropertiesofthematerial.Itisbaseduponinternationaltechnology.Itisthe only instrument in the Rubber Industry which helps to choose right ingredients andits appropriate dose to meet the end products. Oscillating Disc Rheometer (ODR) canhelp follow the reaction stages in vulcanization of a Rubber Compound. RubberTechnologists will feel more convenient if all the above process is executed byequipmentwhichgivesaccurateresultsandalltheserequirementscanbefulfilled

bytheRheometer.

Additional Information:

• Delivery Time: 30 Days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 
We are offering Zip Endurance Tester to our clients.

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 
As per IS 15298

Additional Information:

• Delivery Time: 3 Days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


as per IS:2925Used For Industrial Safety Helmets

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


as per IS9873 and ISO8124

Product Details:

With the help of our skilled professionals and sound infrastructure facility, we have been able to come up with a range of Folding Endurance Testers. These are developed using high-grade components and other material as per national norms & guidelines. As the name suggests, all our products are designed to determine the folding endurance strength of paper & paper boards. Owing to excellent speed, high performance, simple operations and reliability, these folding endurance tester are widely applauded by the clients.

Product Details:

Used in packaging testing

Additional Information:

• Production Capacity: 50
• Delivery Time: 10 days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 
as per IS:2925Used forindustrial safety helmets

Product Details:

as per IS 13826

Product Details:

Used in paper and packaging industry

Product Details:

ASIAN Atmospheric Pressure Beaker Dyeing Machine is used for high-temperature dyeing of fabric and yarn. This machine is used for sample dyeing of Yarn/Fabrics at a max temperature of 98° C. The machine is a model.
The equipment is basically a doubled walled stainless steel tank. The inside/ outside tank are of SS 304 Grade sheet & jars are of SS 304 Grade. A motor & a cam – assembly are provided to give to & fro movement to SS rods to which yarn or fabric samples are tied.

Models are available on request:

• 12 Beakers X 250ml
• 6 Beakers X 250ml
• 6 Beakers X 500ml
• 10 Beakers X 250ml

Specifications:

• Heating Load: 4.5 kW
• Programmer: 97 Programs 20 Steps
• Rotor Speed: 25rpm variable speed model also available on request
• Temperature: 1400
• Cooling Rate: 30 / Min
• Power: 3 phase neutral 415 V AC, 50 Hz

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 

IS:9873,ISO 8124 EN 71

Additional Information:

• Item Code: ATEC
• Production Capacity: 10000 per month
• Delivery Time: 3 days
• Packaging Details: Standard template

Product Details:

Used to test torque required for cap opening and closing.

Additional Information:

• Delivery Time: 15 days

Product Details:

Laboratory use of shaking

Additional Information:

• Production Capacity: 50
• Delivery Time: 25 days

Product Details:

Used for powder material

Additional Information:

• Production Capacity: 50
• Delivery Time: 10 days

Product Details:

The Dry Sand Abrasion Tester has been designed as per ASTM G 65 specifications. This test uses a rubber-rimmed wheel as the bed for silica abrasive that is fed from a hopper by a nozzle between the sample and the wheel. The sample is pressed into the wheel by a dead weight loaded lever. The test is run for a set number of revolutions with automatic cutoff and the wear is measured by measuring the volume of material lost through mass loss and density measurements.

 

The flow of sand into the gap between the surfaces is controlled by the geometry of the nozzle that must be very carefully defined to obtain the required sand flow rate. The abrasive only passes through the wear interface once and is thrown away at the end of the test.

 

The uniform loading and uniform flow of abrasive into the gap between wheel and the specimen under controlled conditions give consistent results. The properties of the rubber lining of the wheel also have a major effect on the results and need to be carefully controlled.

Additional Information:

• Item Code: ATEDrySand
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: New Delhi
• Production Capacity: 5
• Delivery Time: 30 Days

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 


Used to test adhesive tape

Product Details:

Used to test ECT,RCT etc

Additional Information:

• Production Capacity: 100 units per month
• Delivery Time: 20 days