Coated Fabric Testing Equipment

Product Details:

We are the leading manufacture &Supplier of different type of qualityTesting & measuring Instruments 

as per IS:7016 part 4 and ISO 7854

Product Details:

We are the leading manufacture &supplier of different type of qualityTesting & Measuring instruments
as per IS: 7016 part 4 and ISO 7854 method Bused for coated fabric testing 

Additional Information:

• Delivery Time: 30 Days

Product Details:

Used for the flex tester under low temperature

Additional Information:

• Delivery Time: 30 days

Product Details:

The ASIAN Pressure Head Tester made on a rigid platform, which consists of a central well fitted with a coaxial ring clamp to fasten the test piece over the well. The upper clamp has the up & down movement with the help of the screw/nut and handles mechanism. The distilled water is filled with the distilled water cup manually and the pressure sensor is also attached to the upper clamping well. The pressure, which is built in the water well while testing is digitally displayed. The lower ring is fixed to the bottom platform. There is a rubber ring attached to the ring for leak-proof of the sample to the water. The well & ring are made of aluminum and stainless steel respectively. There is a compressed air supply line which includes the pressure regulator, Burdon type pressure gauge, air filter, flow regulator and a flow meter. The pressure is controlled with the help of the pressure regulator and the rate of flow of air is controlled with the help of the flow regulator. This is a digital preset timer is also mounted on the panel for the time measurement of the pressure applied to the test specimen. Different models are available.
 
Other Details:

• IS: 7016(7) – 1986: Method of Test for Coated and Treated Fabrics (Determination of Resistance of Penetration by water.)

Product Details:

The Tearing Strength of Fabrics, Paper, Plastic Film, or other similar materials in sheet form is determined by measurement of work done in tearing through a fixed length of the test specimen using the Elmendorf Tearing Tester.

Product Details:

Asian De Mattia Flex Tester has a set of grips to hold test specimens in two tiers with their holding faces lying in the same vertical plane. Holding one end of the test specimen in a fixed grip and the other end in a reciprocating grip provides the flexing and unflexing action. The set of grip has two fixed grips and one large reciprocating grip positioned between them in order to flex half of the test specimen while the other half is being unflexed. The reciprocating grip is slide on hardened and ground rods made of high carbon steel. The reciprocating motion is provided by an eccentric and linkage mechanism driven by an electric motor through V-belt and pulleys. A six digit electronic counter is provided for indicating the number of the test cycles undergone. The equipment is built on a rigid fabricated base plate and finished in metallic painting and bright chrome/zinc plating to give it a corrosion resistant finish. Molding dies for preparing test specimen, and jig and punch assembly for making an initial crack in test specimen for crack growth test are available as optional accessories.